To download, and set up Canon printer setup to your device, visit ij.start.canon. Visit Canon’s official website to learn how to set up the Canon printer drivers and software.

Procedure to Set up Canon Printer for the First Time

In this guide, we’ll assist you via those steps to get your first revealed reproduction the usage of your Canon printer. You can find those instructions at ij.start.canon as well.

• Take the Canon printer out of its package.
• Next, search for the guide to make certain you haven’t overlooked anything important.
• Now, click on the power button to turn it on.
• Place a chunk of paper in the paper tray.
• At this point, the printer has to be turned on.
• Place the cartridges and sheets of paper in the center and output trays, respectively.
• The printer has now been become on and is ready to use.
• Turn in your printer and follow the on-screen commands.
• Decide on a desired language.
• The printer first prints a take a look at print to configure the grids. This manner the printer decides where to print at the sheet of paper.
• Check to see if the print fulfills your expectations. If not, cross into the settings and reset the grids.
• Set the PCB directly to healthy the scanner.
• Afterward, run the scanning process.
• Then, at the lowest of the column, click on the Canon support link https: //ij.start.canon to download the essential software.
• In the search bar, kind the call of your printer’s product, or choose the proper printer family from the drop-down menu below ‘choose product.’
• The model and the serial wide variety of your printer may be found at the front, at the box, and in the guide.
• Select the operating system you need to put in the printer on, like Windows 10 or macOS, below Drivers.
• Click on Download.
• Now you could start using the software.
• Choose whether you desire to connect with the printer thru Wi-Fi or a printer wire.
• The software is simple to put in and only takes some minutes.
• Go for your printer’s Settings, then Device Settings, and finally Wireless LAN Settings.
• From the drop-down option, select Default Settings or Setup without cable.
• Give your network a unique call. SSID stands for Service Set Identifier.
• Then, enter the password to your Wi-Fi network.
• Click the OK button.
• Print the primary web page and grasp a printout from the printer.
• The printer is now configured. Make your first print to get started.

For more help:- https://crawlinfo.com/software/canon-printer-setup-at-canon-com-ijsetup/